Marantz SR7005 Surround receiver.

Jeg har opgraderet, så min trofaste surround receiver skal ha ny ejer. Den har en bitte ridse på toppen, bagerst. Den er ikke gennemgående. Fjb. Har en fejl. Den kan periodisk ikke tænde/slukke forstærkeren, men resten virker. Tilbehør. power kabel, fjb, audyssey-mike Her er alle de tøre specs. Marantz SR7005 Class A/B 7x125watt/8ohm Rated output: Front: 125 W + 125 W (8 Ohm, 20 Hz – 20 kHz with 0.08 % T.H.D.) Center: 125 W (8 Ohm, 20 Hz – 20 kHz with 0.08 % T.H.D.) Surround: 125 W + 125 W (8 Ohm, 20 Hz – 20 kHz with 0.08 % T.H.D.) Surround back / Front height / Front wide: 125 W + 125 W (8 Ohm, 20 Hz – 20 kHz with 0.08 % T.H.D.) Maximum effective output power: Front: 195 W + 195 W (6 Ohm, 1 kHz with 10 % T.H.D.) Center: 195 W (6 Ohm, 1 kHz with 10 % T.H.D.) Surround: 195 W + 195 W (6 Ohm, 1 kHz with 10 % T.H.D.) Surround back / Front height / Front wide: 195 W + 195 W (6 Ohm, 1 kHz with 10 % T.H.D.) Output connectors: 6 – 8 Ohm Analog Input sensitivity/Input impedance: 200 mV/47 kOhm Frequency response: 10 Hz – 100 kHz — +1, –3 dB (DIRECT mode) S/N: 96 dB (IHF–A weighted, DIRECT mode) Distortion: 0.008 % (20 Hz ~ 20 kHz) (DIRECT mode) Rated output: 1.2 V Digital D/A output: Rated output — 2 V (at 0 dB playback) Total harmonic distortion — 0.008 % (1 kHz, at 0 dB) S/N ratio — 102 dB Dynamic range — 100 dB Digital input: Format — Digital audio interface Phono equalizer (PHONO input — REC OUT) Input sensitivity: 2.5 mV RIAA deviation: ±1 dB (20 Hz to 20 kHz) S/N: 74 dB (A weighting, with 5 mV input) Rated output: 150 mV Distortion factor: 0.03 % (1 kHz, 3 V) Video section Standard video connectors Input/output level and impedance: 1 Vp-p, 75 Ohm Frequency response: 5 Hz – 10 MHz — +1, –3 dB Color component video connector Input/output level and impedance: Y (brightness) signal — 1 Vp-p, 75 Ohm PB / CB signal — 0.7 Vp-p, 75 Ohm PR / CR signal — 0.7 Vp-p, 75 Ohm Frequency response: 5 Hz – 60 MHz — +0, –3 dB (when “Video Convert” set to “OFF”) 13kg.